Innovative Solutions for Green building

N.C.T. collaborates with Pentachem to develop innovative products and technologies for construction with green building. Our products are specifically designed to solve any type of problem.

PROBLEM: RISING DAMP

SOLUTION:
1) Remove the plaster from 70 to 100 cm in height depending on the moisture present.
2) Use the waterproofing “AQUASTOP SL” diluted with distilled water in a 1:1 ratio, using a brush or roller on the wall without plaster.
3) Add the additive VISCOCELL I150” during the mixing of the new plaster.
4) Proceed with the finishing using breathable products: Silicates, Siloxanes, Lime, etc.
5) Put on a complete finish coat of “Aquastop 605” on the outside wall to create a protective barrier.

PROBLEM: MOISTURE IN BRACING

1) Block the infiltrating water with the product “LEGACEM”.
2) Scrape and clean the old plaster.
3a) Redo the plaster adding to the mortar the additive “AQUASTOP 30 P” or “AQUASTOP 20 P”.
3b) As an alternative, make the plaster with osmotic mortar.
4) Proceed with the finish brush or roller using the product “ECOVERNICEM (cement paint).
5) If necessary, recoat the finish with a protective “AQUASTOP L25” using the brush roller.
6) During the construction of floors on the ground or underground add “AQUASTOP 20 P” as a waterproof agent.

Cart Item Removed. Undo
  • No products in the cart.